Botuniverse Blog

>
Botuniverse Blog

Basic Info About the SG-90 / SG90 Servo A standard servo typically consists of a small electric motor, a potentiometer,controller, and gears. The position of the output shaft is constantlymeasured by the internal potentiometer and compared with the position set by the Arduino. If there is any difference between the two values, the motor is moved so that both the…

Basic Info about the PS4 Joystick The PS4 joystick module is a very vital component in making Arduino systems. For this tutorial, we will be using Botuniverse Joystick. The PS4 joystick is similar to two potentiometers joined together. One in the x-axis for the vertical movement and one in the y-axis for horizontal movement. It also has a press button…

In the last part of How to use a LCD we learnt how do the pins work , different modes of the LCD & using the Liquid Crystal library to show characters on the LCD. If you haven’t gone through it click here to read that first. lcd.clear() As the name suggests, this function does nothing more than just clear…

The LCD Display is now very commonly used. To begin with we will be using the botuniverse LCD display. In the LCD Display, we have 16 columns & 2 rows with each block having 5×8 pixels. Let’s Understand how the pins work: VSS / GND – This is the negative terminal & has to be connected to the GND pin…

Start typing and press Enter to search

Shopping Cart

No products in the cart.