-
40pcs, 10cm Female to Female Dupont Wire
₹50.00✔️ Jumper wire length: about 10cm/ 4.2 inch, Standard 2.54mm sockets. ✔️ Package: 1 x 40-pin female-female jumper wire ✔️ The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers ✔️ 10 different colors, Made of high-grade copper wire material for safe and durable to use. ✔️ Suitable for making…
-
40pcs, 20cm Male to Male Dupont Wire
₹60.00✔️ Jumper wire length: about 20cm/ 8.4 inch, Standard 2.54mm headers. ✔️ Package: 1 x 40-pin male-male jumper wire. ✔️ The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers ✔️ 10 different colors, Made of high-grade copper wire material for safe and durable to use. ✔️ Suitable for making…
-
600-30 Different Types Of Resistors
₹270.0010Ω(20 pieces) 22Ω(20 pieces) 47Ω(20 pieces) 100Ω(20 pieces) 150Ω(20 pieces) 200Ω(20 pieces) 220Ω(20 pieces) 270Ω(20 pieces) 330Ω(20 pieces) 470Ω(20 pieces) 510Ω(20 pieces) 680Ω(20 pieces) 1KΩ(20 pieces) 2KΩ(20 pieces) 2.2KΩ(20 pieces) 3.3KΩ(20 pieces) 4.7KΩ(20 pieces) 5.1KΩ(20 pieces) 6.8KΩ(20 pieces) 10KΩ(20 pieces) 20KΩ(20 pieces) 47KΩ(20 pieces) 51KΩ(20 pieces) 68KΩ(20 pieces) 100KΩ(20 pieces) 220KΩ(20 pieces) 300KΩ(20 pieces) 470KΩ(20 pieces) 680KΩ(20 pieces) 1MΩ(20 pieces)
-
9v Battery Snap with Pin Connnector for Arduino
₹25.00Plug Type: 2.1mm x 5.5mm Male to 9V Battery Clip Cable length:6 inches Great to use for LED strip light or arduino Package contains 1 pc 9v Battery Clips (9V battery is not included) Arduino and Battery shown for example only
-
A4988 Stepper Motor Driver
₹120.00A4988 driver board widely used in 3D printers and small CNC machines Simple step and direction control interface Thermal protection, over-current protection, ground fault protection Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve…
